Category:Configuration

From Internetworkpro

Jump to: navigation, search

This page or section provides device configuration instructions Please note that the information on this page has not been checked for accuracy and is not intended as a replacement to documentation. Please ensure you understand your desired objectives before attempting to apply any examples listed. See more examples at Category:Configuration

The articles in this category outline configuration elements for various platforms. To add an article to this page, add {{Configuration}} to the top of the page.

Subcategories

This category has the following 2 subcategories, out of 2 total.

C

• Category:Configuration

V

• Category:VPN

Pages in category "Configuration"

The following 83 pages are in this category, out of 83 total.

A AAA: Attributes for local user database ASA Asymmetric Routing ASA and PIX using http inspection to filter URLs and Hosts in HTTP Advanced ping checker B Basic PPPoE Bring down an interface when IP SLA fails C Cisco PPTP VPDN server Cisco VPN Client ISAKMP Transform Set List Cisco original encryption algorithm in reverse Configuration Management using Solarwinds TFTP Engine Configuration for Bi-directional LSP between Juniper and Cisco Configuring Cisco to work with a Windows NLB Cluster Configuring IS-IS as your IP routing protocol Configuring WDS using a local RADIUS server Connecting to the console with cu Connecting to the console with minicom Connecting to the console with tip Converting a Cisco 7940G IP phone SCCP 8.x to SIP 8.x image D DHCP Sample Config With Static Reservation DSL PPOE IPSEC Example DSL PPPOE IPSEC Example Discover network configuration on a Cisco 837 (in TCL) Distribute-list Dynamips DMVPN over NBMA Lab Dynamips MPLS/VPN Lab Dynamips Simple Frame Lab Dynamips Terminal Server Dynamips w/ real switches

E Edit files using TCL F Filter syslog messages then send an email G Generating actions based on OID status Generating syslog alarms for RTR/IP SLA probes H HQoS Hub and Spoke VPN with VTI, dual hubs, spokes with redundant internet access Hub-Spoke IPSec VPN between ASAs I IEEE 802.1q IEWB-Dynamips IEWB-Dynamips-Sandbox IOU INE Topology IP SLA Tracking for Routes IPSec: L2L VPN with overlapping spoke networks IPSec: Router and VPN Client for Public Internet on a Stick with NVI Initial configuration of a 881G router Cellular interface J Juniper Netscreen Quick Reference L LAN-to-LAN IPSec VPN between IOS and ScreenOS LAN-to-LAN IPSec VPN between IOS hub and PIX/ASA 7.2 spokes with dynamic IP addresses LAN-to-LAN IPSec VPN between PIX/ASA 7.2 hub and IOS spokes with dynamic IP addresses M MPLS L3VPN with Shared Site MPLS with L3VPNs Mark DSCP on traffic from the control plane Monitor for abnormal bandwidth use, ignore short spikes, store five minute values Monitor if RANCID grabbed all configuration files successfully Multilink PPP N NAT: access outside global address from the inside O OSPF standards P Page Guidelines

P cont. Policy-based Routing Sample R Redundant Internet Connections on PIX/ASA 7.2 Remote Triggered Black Hole Filtering Remote configuration through snmp and tftp Run several commands at once S SNMPv3 Basic Configuration SSH and Telnet Session Logging SSL VPN with Anyconnect Sample BGP Config 1 Scripts Simple Hybrid To Native 6500 Conversion Simple LAN-TO-LAN VPN Between IOS Routers Site to Site ASA Split Tunnelling Squid WCCP Syslog-NG for Cisco Devices T Template:Configuration Template:VPN Tutorials U Use Kron Tab to run scheduled command Using CiscoCD with linux Using GNU Screen w/ dynamips/dynagen Using cisco archive config options Using named access lists V VRRP Configuration Virtual Switch System Z Basic LAN-to-LAN Configuration Between ASAs

Retrieved from "http://www.inetpro.org/wiki/Category:Configuration"

Category: Configuration

• This page was last modified on 16 November 2010, at 22:06.
• This page has been accessed 19,178 times.
• Content is available under GNU Free Documentation License 1.2.

• Privacy policy
• About Internetworkpro
• Disclaimers