From Internetworkpro
| This page or section provides device configuration instructions
Please note that the information on this page has not been checked for accuracy and is not intended as a replacement to documentation. Please ensure you understand your desired objectives before attempting to apply any examples listed. See more examples at Category:Configuration |
| This page contains configuration examples or information on dynamips
The examples on this page are intended for use with dynamips, the Cisco router emulator. This information is not intended for use on hardware routers, and is primarily used for troubleshooting, testing, and certification lab study. Support of Dynamips is found on Hackis_Forum. For other dynamips pages see Category:Dynamips |
|
| This page or section has been marked as requiring improvement.
Please review this page or section and make any stylistic or grammar changes necessary to improve the article. For assistance, please check the Page Guidelines. To discuss improvement of the article, use the talk page. Other articles in need of improvement can be found at Category:Needs Improvement |
This is a simple frame lab using this topology:
autostart = false
[localhost:7200]
workingdir = C:\Program Files\Dynamips\NBMA\working
[[7200]]
model = 7200
ram = 128
nvram = 64
disk0 = 0
disk1 = 0
confreg = 0x2102
idlepc = 0x6063a6c0
npe = npe-400
midplane = vxr
mmap = true
image = C:\Program Files\Dynamips\NBMA\ios\c7200-jk9s-mz.122-46a.bin
[[Router R4]]
console = 2004
s1/0 = FR 4
[[Router R2]]
console = 2002
s1/0 = FR 2
[[Router R3]]
console = 2003
s1/0 = FR 3
[[FRSW FR]]
4:402 = 2:102
4:403 = 3:103
Back to Sample Configs
